Mode 2 - Dual Display Mode; Mode 3 -Timer Starts With Flow Mode - acaia Pearl User Manual

Mode 2 - Dual Display Mode

• There are two different weighing units in Dual Display Mode: gram and ounce.
• In grams, the LED display shows [0.00 0].
• In ounces, the LED display shows [0.00 0.00].
• The maximum display time will be 9 minutes and 59 seconds. The weight shown on
the right side of the display measures from 0 to 999. When the value is over 1000, it will
restart from 0 with mode indicator flashing.
Action
Start/Stop/Reset Timer
Tare Weight
Reset Mode
Switch Mode

Mode 3 -Timer Starts with Flow Mode

• The LED display shows [0:00
grams.
• The LED display shows [0:00 0.00] with the timer on the left and the weight on the right
in ounces.
• The timer will display from [0:00] to [9:59] before stopping.
Action
Initiate Auto Start
Tare Weight
Stop Timer
Reset Mode
Switch Mode
In Dual Display Mode, the scale displays [0.00 0] with
a timer (left) and weight (right).
Operation
Tap Power button
Tap Tare button
Double tap Tare button
Press and hold Power button
Place an item on the scale. Tap the power button to
automatically tare and prepare the timer to detect the
flow of water. The timer will flash, indicating that it is
ready. Begin pouring and the timer will start with flow
detection from the pour. The timer stops when the
brewing equipment is removed.
0] with the timer on the left and the weight on the right in
Operation
Tap Power button
Tap Tare button
While timer is running, tap Power button
Double tap Tare button
Press and hold Power button
7