Default Weighing Unit [Default=G]; Power Saving Mode; Weighing Mode Setting [ Node_1 ] [Default]; Dual Display Mode Setting [ Node_2 ] - acaia Cinco Operation Manual

Default Weighing Unit
1. The Default Weighing Unit is set to
T
2. Tap Button to switch the Default Weighing Unit between gram and ounce.

Power Saving Mode

1. The Default Power Saving Mode is set to 90 secs.
2. The Acaia Cinco will wait for the selected number of seconds to enter Power Saving Mode. The
LED display will dim to save power.

Weighing Mode Setting [ nodE_1 ] [default]

1. The default Weighing Mode Setting is set to ON, which means this mode is enabled.
2. ON: The Weighing Mode is enabled.
3. OFF: The Weighing Mode is disabled.

Dual Display Mode Setting [ nodE_2 ]

1. The default Dual Display Mode Setting is set to ON,
2. ON: The Dual Display Mode is enabled.
3. OFF: The Dual Display Mode is disabled.

Auto Start Mode Setting [ nodE_3 ]

1. The default Auto Start Mode is set to ON, which means this mode is
2. ON: The Auto Start Mode is enabled.
3. OFF: Auto Start Mode is disabled.

Bluetooth ON/OFF [default=ON]

1. The default Bluetooth is set to ON, which means Bluetooth is enabled.
2. OFF: The Bluetooth is disabled. The scale does not allow any Bluetooth connection.
2. ON: The Bluetooth is enabled. The scale allows Bluetooth connection. User may connect the
scale with Brewmaster.
T
3. Press and hold
Chapter 5: Configuration
[default=g]
be gram if [ 9 ] is selected and ounce if [ o2 ] is selected.
Button for 1 second until [ SLEEP ] is shown to confirm the modification.
which means this mode is enabled.
enabled.
16