Sleep Timer Setting; Zero Tracking Setting; Key Sound Setting - acaia Lunar Operation Manuals

Sleep Timer Setting [ SLEEP ]
1. Sleep Timer Settings can also be configured in the Acaia Apps.
2. The number indicates the amount of time before the scale automatically powers off. For
example, when 10 is selected, the scale powers off after 10 minutes of being idle, if the scale is
disconnected from all mobile devices.
3. Tap the tare button to toggle through the options.
4. Press and hold the tare button for 1 second until the next setting, [ trAcE ], is shown on the
LED to confirm the selected option.
Zero Tracking Setting [ trAcE ]
1. Zero Tracking is a function for maintaining the zero indication within certain limits automatically.
2. OFF: It is not recommended to turn off the Zero Tracking because the zero indication would
draft easily as room temperature changes.
3. 0.5 d~3 d: For example, for standard resolution each division is 0.1 g, 3 d = 0.3 g. When Zero
Tracking is set to be 3 d, any initial weight between +/- 0.3 g on the weighing pan would be
zeroed out gradually.
4. 2 d is recommended in general for the Acaia Lunar.
5. Press and hold tare button for 1 second until the next setting, [ bEEP ], is shown on the LED to
confirm the selected option.
Key Sound Setting [ bEEP ]
1. Key Sound Settings can also be configured in the Acaia apps.
2. Set the Key Sound function off to turn off the beeping sound or on to turn on the beeping sound.
3. Press and hold tare button for 1 second until the next setting, [ 0.rAnGE ], is shown on the LED
to confirm the selected option.
Chapter 4: Configuration 23