Appendix A. Smart Calibration - acaia Lunar Operation Manuals

Appendix A. Smart-Calibration
If you decide to calibrate your scale, it will only be as good as the accuracy of the calibration
weights you use.
*Note : If you use weights other than Acaia Weights, we recommend standard weights with class F
or F .
2
Calibration Mode
1. While the scale is in Weighing Only Mode and the weighing unit is in grams, tap the tare button
quickly multiple times until LED display shows [ CAL ] and then [ 100.00 ].
2. Place the 100 g Acaia calibration weight that came with your Lunar in the middle of the weighing
platform and wait for the scale to execute calibration procedure.
3. The LED display shows [ _End_ ] when the calibration procedure is completed. You may
remove the calibration weight when completed.
Note:
1. If your Weighing Only Mode is disabled, please refer to Chapter 4: Weighing Mode Setting to
turn on.
2. If you use weights other than Acaia Weights, we recommend F1 or F2 class weights at 100,
300, 500, 1000, or 1500 grams.
Appendix A. Smart-Calibration
1
29