Mode 6 - Auto-Tare Mode - acaia Lunar Operation Manuals

Mode 6 - Auto-Tare Mode (

In this mode, the scale will only perform auto-tare without automatically starting the
cup on the scale and auto-tare will be performed. Pull the shot of espresso as usual. When the cup
is removed from the scale, the display flashes the final beverage weight and also shows the tare
weight of the cup. The weight resets after 30 seconds (to edit this reset time, see Chapter 4:
Configuration to edit the setting
Display
•
The LED display shows [0:00 0.0] with the timer on the left and the weight on the right in
gram units.
•
The LED display shows [0:00 0.000] with the timer on the left and the weight on the right in
ounce units.
•
The timer displays from [0:00] to [9:59] and then the timer will stop.
Action
Tare Weight
Switch Mode
Stop Timer
Reset
Chapter 3: Basics
) - Square
[ Auto_rES ]).
Operation
Tare function is performed when a stable weight is placed on the scale
Press and hold power button
Tap power button
Double tap tare button to reset the mode
timer. Put the
19