Mode 3 - Timer Starts With Flow Mode - acaia Lunar Operation Manuals

Mode 3 - Timer Starts with Flow Mode (

When the scale detects the flow of espresso, the timer starts. The timer will stop when the flow
stops. This mode is designed to detect the slow trickle of a shot of espresso.*please note: The flow
detection mode is designed to detect the flow of espresso. The timer may not trigger when
attempting to pour from a kettle.
Display
•
The LED display shows [0:00 0.0] with the timer on the left and the weight on the right in
gram units.
•
The LED display shows [0:00 0.000] with the timer on the left and the weight on the right in
ounce units.
•
The timer displays from [0:00] to [9:59] and then the timer will stop.
Action
Start/Stop/Reset Timer
Tare Weight
Switch Mode
Stop Timer
Reset
Chapter 3: Basics
Operation
The timer will start when flow is detected
Tap tare button
Press and hold power button
The timer will stop when flow is no longer detected
Double tap tare button to reset the timer and to tare the weight at the same
time
) - Droplet
13