Zero Range Setting; Weighing Filter Setting; Default Unit Setting - acaia Lunar Operation Manuals

Zero Range Setting [ 0.rAnGE ]
1. The Zero Range setting determines the range for which the tare button executes zero operation
instead of tare operation.
2. When Zero Range is set to 2, the range for zero-setting will be 2% of the capacity, i.e., +/- 40 g
for Acaia Lunar. By pressing the tare button, any weight within +/- 40 g is zeroed out by zero
operation while any weight lays outside the range is tared out by tare operation.
3. If Zero Range is set to 100, the range for zero-setting will be 100% of the capacity, i.e., +/- 2 kg
for Acaia Lunar. Therefore, instead of tare operation, zero operation would be executed in this
setting whenever tare button is pressed.
4. Press and hold tare button for 1 second until the next setting, [ Filt ], is shown on the LED to
confirm the selected option.
5. Notice: The difference between zero operation and tare operation is that zero operation would
simply ignore the weight and display as 0 while tare operation would deduct the weight from
weighing result. However, zero operation does not increase the scale capacity.
Weighing Filter Setting [ Filt ]
1. The Weighing Filter Setting determines the speed that the load receptor responds to weight and
determines the weighing value. The larger the number, the more stable but slower the weighing
result will be. The number shown on LED display indicates the current filter setting
2. Press tare button to change the parameter.
3. Press and hold tare button for 1 second until the next setting, [ Unit ] is shown on the LED to
confirm the selected parameter.
Default Unit Setting [ Unit ]
1. The Default Weighing Unit is set to grams if [ 9 ] is selected and ounce if [ o2 ] is selected.
2. Tap the tare button to switch the Default Weighing Unit between grams and ounces.
3. Press and hold tare button for 1 second until [ rESoL ] is shown on the LED to confirm the
selected option.
Chapter 4: Configuration 24