Offline Mode Setting (Fl) - Omron V720S-BC5D4A User Manual

V720-series electromagnetic inductive rfid system
Table of Contents

Advertisement

5-7
Setting Command

5-7-12 Offline Mode Setting (FL)

This command selects whether the Reader/Writer will start in online mode or offline mode.
When offline mode is selected, the Reader/Writer will perform EAS check independent of the
host, and output a signal from the output port (OUT1) if the result exceeds the specified
criterion.
<Command Format>
STX
Node No.
1
2
On/OFF mode
Time (*100ms)
Threshold (%)
<Response Format>
STX
Node No.
1
2
Response code:
On/OFF mode
Time
Threshold
● The setting is enabled after reset by Reset Command (XZ).
● To enable the setting at the next startup, the setting must be saved in the non-volatile memory
(EEPROM) on the Reader/Writer using Set Value Writing (EW).
● To enable EAS on the Tag, use System Write (SW) in ISO Mode, or EAS Setting (ES) in I.CODE1
Mode. The command related to this is the EAS Setting(ES) and EAS Check(EA).
Command
On/OFF
code
mode
"FL"
2
1
Specify the number corresponding to the mode in which the
Reader/Writer will start.
Specification range: 0, 1, *
When "* "is specified, the Reader/Writer reads the current setting.
Specification
number
On/OFF mode
Specify the length of time in HEX for which the signal will be output to
OUT1 in offline mode.
Specification range: 01 to FFh (100ms to 22.5s)
When "**" is specified, the Reader/Writer reads the current setting.
Specify the threshold in HEX to be output to OUT1 in offline mode.
Specification range: 00h to 64h (%)
(Refer to EAS Check Command.)
When "**" is specified, the Reader/Writer reads the current setting.
Retry
Command
Response
flag
code
code:
"FL"
"00"
1
2
00: Normal completion
For other response codes, refer to 5-3-7 Response Code List.
Indicates the number corresponding to the specified On/Off mode.
Indicates the time corresponding to the specified On/Off mode.
Indicates the criterion corresponding to the specified On/Off mode.
Notes on the execution of Offline Mode Setting Command
Time
Threshold ETX BCC
2
2
1
0
Online mode
On/OFF
Time
mode
2
1
2
1
1
Offline mode
Threshold ETX BCC
2
1
1
5-7
*
-
5-60

Advertisement

Table of Contents
loading

This manual is also suitable for:

V720s-bc5d4a-us

Table of Contents