Eas Setting (Es): I.code1 Mode Only; Quietbit Setting (Qb): I.code1 Mode Only - Omron V720S-BC5D4A User Manual

5-5
System Command

5-5-5 EAS Setting (ES): I.CODE1 Mode only

This command sets the EASBit of a Tag incorporating I.CODE1 chip. When the EASBit is
disabled, the Reader/Writer will not return a response to the EAS Check Command (EA).
<Command Format>
STX Node No.. Command code
1 2
Setting
<Response Format>
STX Node No..
1 2
Response code
：The relative commands are set in offline mode (refer to 5-7-12 FL Command). This command is
for I.CODE1 mode Only. The command is not available in ISO mode.

5-5-6 QuietBit Setting (QB): I.CODE1 Mode only

This command sets QuietBit of a Tag incorporating I.CODE1 chip. If you enable this bit, a Tag
ceases to return a response to any command (excluding the EAS Command).
<Command Format>
STX Node No.. Command code
1 2
Setting
<Response Format>
STX Node No.. Retry
1 2
Response code
：This command is for I.CODE1 Mode Only. The command is not available in ISO mode.
Setting
"ES"
2 2
Specification range：00to01
00:EAS enabled
01:EASdisabled
Retry Command code Response
flag "ES" code
"00"
1 2 2
00:normal completion
For other Response Codes, refer to SECTION 5-3-7 Response Code List.
Setting ETX BCC
"QB"
2 2
Specification range:00h to 01h
00: Disable QuietBit
01: Enable QuietBit
Command Response
flag code code
"QB" "00"
1 2 2
00:normal completion
For other Response Codes, refer to SECTION 5-3-7 Response Code List.
ETX BCC
1 1
ETX BCC
1 1
1 1
ETX BCC
1 1
5-5
5-44