Table of Contents
Advertisement
Cables with locking attachments must be secured before use.
Failure to do so may damage the device.
The specifications of the DC power unit used must satisfy all of the following
conditions:
The power unit must be connected to the V720-series system and must not be connected to any
・
other devices.
The supply voltage for the power unit must be within the range specified in this document (within
・
the range of DC24V + 10% and – 10%).
Observe correct polarity when connecting the power unit.
・
Be sure a solid Class D grounding is established (former Class 3 grounding).
・
To avoid interferences with other systems, adhere to the following items and check
them before using the product.
The product uses a publicly available ISM frequency band of 13.56 MHz to communicate with
Tags. Some transceivers, motors, monitoring devices, power supplies (power supply ICs), and
other similar RFID systems may generate noise, which cause radio interference and may affect
communication with Tags. If the product is required in the vicinity of these items, check for any
interferences prior to use.
On the contrary, the system itself may affect radio station transmissions or medical devices. Be
cautious when using the system in the environments where such effects might occur.
To minimize noise effects, adhere to the following:
Establish a Class D grounding (former Class 3 grounding) for metal objects placed in the
・
vicinity of the system.
Keep cables away from those with high voltages or heavy currents.
・
Do not allow the device or cables to be soused or exposed to water.
Doing so may result in electric shock, fire or failure of non-waterproof devices or cables.
If the device fails or is exposed to water (non-waterproof devices or parts), or an
unusual smell, smoke, or sparks are detected, immediately refrain from using the
device and contact OMRON or a sales representative for service and repair.
Continued use of the failed device may result in electric shock or fire.
Do not use damaged cables.
Continued use of the damaged cables may result in electric shock or fire.
vii
Advertisement
Table of Contents
