Included Component; Explosion Drawing - Xylem HYDROVAR smart Operating Instructions Manual

3.2.2 Included Component

1 x HYDROVAR-Smart print
1 x Display unit
1 x Display-sealing
1 x Front cover
1 x Protection cover
1 x Label (SCH 60.25)
1 x Label (SCH 60.35)
4 x Distance bolt M4xM4x22 I/I
4 x Distance bolt M4xM4x8 A/I
4 x Screw M3x10
4 x Screw M4x10
4 x Screw M4x6
8 x Washer M4
3.3

Explosion drawing

M4x10
Washer M4
Distance boltM4xM4x22 I/I
Distance bolt M4xM4x8 A/I
The self-adhesive label SCH 60.25 (with the cut-out for the display) has to be fixed in this
way, that the yellow areas are placed on top of the push buttons.
The self-adhesive label SCH 60.35 has to be fixed below the display unit.
A photo of the right place for these labels is shown on the first page of this instruction
manual!
Protection cover HYDROVAR-
Smart print
M4x6
Washer M4
11
Display-sealing
Front cover
M3x10
Display unit