Troubleshooting - Xantrex Xanbus System Control Panel Owner's Manual

Troubleshooting

Types of Faults and Warnings
The various types of fault and warning messages behave differently, and
give you the option to treat them differently when they appear. For more
information about the types of fault and warning messages, see "Types" on
page 27 and "Types of fault messages" on page 29.
97-0022-01-01
Warning Reference Table
Table 1 Warning Reference Table
Warning
number Message Type
The value failed to Automatic
W250
change. Try again.
W251 Please confirm: Manual
Equalization
process.
Cause Action
A Xanbus-enabled Check device
device rejected the operation guide and
new setting. settings. The setting
may be out of range,
the system mode may
be incorrect, or
another device setting
is overriding the
setting you want to
change.
A temporary Try changing the value
communication again.
problem stopped the
SCP changing a
value that you
entered.
Press Enter to begin
You have enabled
Equalization on the equalizing batteries or
Func to return to the
inverter/charger or
charge controller previous menu.
menu.
31