Xanbus-Enabled Products and Accessories
Product/Accessory
Freedom SW Series Inverter/Charger
Freedom Sequence Intelligent Power
Manager
Xanbus Automatic Generator Start (AGS)
25-ft network cable for Accessories
75-ft network cable for Accessories
The Freedom SW Inverter/Charger is a true sine wave inverter/charger that
can be used for mobile, marine and commercial applications. The Freedom
SW Inverter/Chargers are designed to operate with a wide variety of
generators and are capable of operating in parallel with a generator for short
durations to assist with starting large loads. The Freedom SW is a
convenient combination of an inverter, multistage battery charger, and
transfer switch in one electronic device.
The Xantrex Automatic Generator Start automatically starts and stops a
generator using dry contact relays to operate the auto-start function of a
generator.
The Freedom Sequence Intelligent Power Manager is a fully integrated
power management system that provides automatic power and load
management for use in recreational vehicles (RV) while receiving power
from a generator or shore power.
97-0022-01-01
Product Number
815-2012 (2kW power rating),
815-3012 (3kW power rating)
809-0913 (four-circuit model),
809-0912 (six-circuit model)
809-0915
809-0940
809-0942
Freedom SW
Inverter/Charger
AGS
25-ft cable
75-ft cable
Introduction
ul t
/
AC
Fa
ar ge
rt er
Ch
In ve
O n
rt er
In ve
le
ab
En
t
se
Re
Freedom Sequence
power manager
3
Need help?
Do you have a question about the Xanbus System Control Panel and is the answer not in the manual?