Using The Remote Control - Valor Legend G3.5 700JN Owner's Manual

OWNER'S
INFORMATION
Control
BEFORE YOU BEGIN, please note that
on this system, the settings of time, temperature and
automatic ON/OFF can only be programmed when
the function display is fl ashing. Be patient when
programming as it can take a few seconds to set.
Do not leave the handset on the mantel or hearth.
8

Using the Remote Control

Synchronize Remote
Current
temperature
(F or C)
Period
start or end
(Temp, Timer)
Current
programmed
period (Timer)
(scrolls
through
modes and
settings)
(returns
to set mode,
turns the burner
and the pilot off )
Handset
sensor
Battery status
Current time
(12 or 24 hour clock)
Fan setting (if used)
Modes (Manual,
Temperature, Timer)
Large flame
button (flames
up, sets hours,
temperature)
Small flame
button (flames
down and off,
sets minutes,
temperature)