Install Handset Wall Holder - Valor Legend G3.5 700JN Owner's Manual

QUALIFIED
INSTALLER

Install Handset Wall Holder

The remote control kit for this fi replace
comes complete with a wall-mounted holder.
This holder is not required in all installations
but is provided as an optional feature for
those customers who wish to mount the
remote handset to the wall.
To install the holder to the wall, fi nd a
convenient location and use the hardware
provided with the kit. See the diagram below
for required hardware and confi gurations.
Note that the holder can be installed at the
base of a light switch plate.
IMPORTANT. The location of the remote
control handset is important to assure proper temperature regulation. To obtain a constant temperature, we
recommend that the handset should be between 3 and 15 feet away from the appliance but not directly above it.
We also advise that the handset should be located away from any other heat source and not in direct sunlight as
this may aff ect the temperature sensor located in the remote handset.
42
Installation
Packing Contents:
1 Wall Bracket A
2 Screws B
1 Screw C
2 Wall Anchor D
1 Spacer E
(detach before assembly)
1 Wall Bracket F
Alternative 1
Alternative 2 Alternative 3
Switch Plate