Advertisement
6
FUNCTIONAL TEST
Functional tests alway with door open!
• Enter code (1,2,3,4,5,6 or 5,5,5,5,5,5).
• Turn boltwork handle towards 'OPEN' position.
• For EM2520: After approximately 5 seconds, the motor can be heard again when it pushes the lock
bolt against the blocking bar of the boltwork.
• Turn handle towards 'LOCKED' position.
• For EM3020: Push a random key. You can hear the motor and the bolt will slide to the locked
position.
• When the lock is closed you will hear a double signal.
Repeat functional test several times before locking the safe door!
Check the keypad
If the lock does not react, follow the procedure below to check that your keypad is working.
Press and hold key '5' until you hear a double tone. The LED will illuminate when performing the fol-
lowing actions:
5
Next, press all of the keys one by one and one after the other.
1
2
3
4
If the key = OK
If the key = not OK
, the test will be aborted.
If one or more keys do not operate properly, please contact your supplier.
6
5
6
7
8
9
0
www.m-locks.com
Advertisement
