Related Manuals for M-LOCKS EM2050
Summary of Contents for M-LOCKS EM2050
- Page 1 Multi Level Software Locks EM2050 EM3050 EM3550 User manual V03 EN M•LOCKS BV Vlijtstraat 40 • 7005 BN Doetinchem • The Netherlands • www.m-locks.com...
- Page 2 www.m-locks.com...
- Page 3 Activating users with Dallas key Disabling / enabling users not active in dual mode Deleting users Deleting users in dual mode Setting the time delay and open window time8 Deleting the delay setting User audit Lock audit Replacing battery Troubleshooting www.m-locks.com...
-
Page 4: Important Instructions
In fact it may happen that the electrostatic charge of a user exceeds the extreme value many times.That’s why we are asking you to touch the metal surface of the safe for discharging before operating the lock. Caution! Don’t forget your code, otherwise the lock can not be used anymore! www.m-locks.com... -
Page 5: Symbols And Signals
OPENING IN STANDARD MODE For example! EM2050: Enter the code (i.e. 1-1-1-1-1-1) After entering a right code, a double signal sounds, you can now unlock the door and open it. If the door is not opened within 3 seconds, the lock will automatically lock again. - Page 6 Two users are required to open with dual combo. For example 1-1-1-1-1-1 and 2-2-2-2-2-2. EM2050: Enter codes (i.e. 1-1-1-1-1-1 and 2-2-2-2-2-2). After entering right codes, a double signal sounds, you can now unlock the door and open it. If the door is not opened within 3 seconds, the lock will automatically lock again.
-
Page 7: Changing Code (With The Door Open!)
• Enter the old code • Select your new personal code. Enter the new code • Enter the new code again If an incorrect code is entered on the second occasion, a long signal sounds and the old code remains valid. www.m-locks.com... -
Page 8: Activating Silent Alarm
9, you have to enter 0, to send a silent alarm. For example: Valid code 2-2-2-2-2-2, alarm will be sent by entering: 2-2-2-2-2-3. This code works as a valid code. The silent alarm is indiscernibly for an outsider. www.m-locks.com... - Page 9 (IF MANAGER IS IN DUAL MODE) Enter a random User Code. For example! • Enter random User Code Press and hold ‘1’ until a double signal sounds. The LED will illuminate when performing the following actions: • Enter your personal Manager Code www.m-locks.com...
-
Page 10: Disabling /Enabling Users
, hold the Dallas key to the key reader after the last digit • Enter the new User Code again again hold the Dallas key to the key reader after the last digit DISABLING /ENABLING USERS (NOT ACTIVE IN DUAL MODE) www.m-locks.com... -
Page 11: Deleting Users
DELETING USERS IN DUAL MODE (IF MANAGER IS IN DUAL MODE) Enter a random User Code. For example! • Enter random User Code Press and hold ‘3’ until a double signal sounds. The LED will illuminate when performing the following actions: www.m-locks.com... - Page 12 • Enter the delay setting and open window time again The time delay and open window values are directly activated for all codes. CHANGING THE DELAY SETTING AND OPEN WINDOW The delay setting can only be changed or deleted during the open window time. www.m-locks.com...
- Page 13 • Enter the Manager Code • Enter 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 to stop Double signal = active user with code One signal = active user without code (or disabled) Long signal = user not active www.m-locks.com...
-
Page 14: Replacing The Battery
In case of keypads starting with ST40xx and DE20xx, the battery compartment is located inside the safe. If the battery is completely exhausted, hold a fresh battery pressed against the poles on the front of the keypad, while entering the code, until the lock opens completely. www.m-locks.com... -
Page 15: Troubleshooting
The lock does not emit an audible tone when a key is pressed. The battery is exhausted, replace the battery. See point 18. c. I have forgotten my code For security reasons, M-LOCKS does not provide a code that you can use to open your lock. Please contact your supplier. The lock is difficult to move and open This is probably a problem with the lock bar mechanism, inside the safe door, and not a problem of the lock itself. - Page 16 M•LOCKS BV Vlijtstraat 40 • 7005 BN Doetinchem • The Netherlands • www.m-locks.com...