Advertisement
1
IMPORTANT INSTRUCTIONS
• Before mounting the lock, please read the instructions for use carefully.
• Ensure that you only program the lock when the safe is open.
After changing the code, always try the code several times with the safe door open.
• Only after several positive function tests (opening / closing) the safe door can be closed.
• Each key entry is confirmed by an audible tone and visual signal. These signals are not referred to in
the description that follows.
• You have a maximum of 10 seconds for each key entry. If you do not make an entry via the keypad
during this period of 10 seconds, the entry procedure will automatically abort. You must then start
again from the beginning.
• After entering a valid code, you will hear two audible tones. An invalid entry will trigger a long tone.
• If you accidentally enter an invalid code at the first attempt, you must wait 20 seconds before you
re-enter the code.
!
Caution!
• The lock has been designed for use in a temperature range from +10˚C to +50˚C and a non-
condensing humidity range from 30% to 80%.
• It may only be cleaned with a moist cloth (do not use aggressive cleaning agents).
• The lock may only be installed by qualified fitters.
• The lock may not be lubricated.
• Never open the lock housing. If it is necessary to disassemble the hardware, only do so in
accordance with the technical instructions. If you fail to do so, the lock may no longer function
properly and you will forfeit your right to warranty.
2
CHARACTERISTICS
The Motor lock electronic features a 6-digit manager code. The code can be changed by the manager.
With the manager code user codes can be activated and deleted. The EM3050 has a 6- or 7 digits
manager code. Depending on the programming of the lock until 9 users can be added. The lock can be
programmed with silent alarm.
EM2520 / EM3050: After entering a right code, you will hear a double tone, you can now unlock the
door and open it. If the door is not opened within 3 seconds, the lock will automatically lock again.
EM3020: After entering a right code, you will hear a double tone, you can now unlock the door and
open it. To close the lock you have to push a random key (PTC= Push To Close).
The Motor lock can be mounted in all four mounting directions. The mounting dimensions are
standard. The lock is delivered with metric (M6) mounting screws.
www.m-locks.com
Motor lock
V01
EN
3
Advertisement
