Block And Unblock The Lock; Test Mode - M-LOCKS Basic line Series User Manual

Block and unblock the lock

Power up the keypad. Press and hold
message:
Enter the requested code.
If weekly Time Lock is set LCD will display the next opening time.
If you want to set a different opening time enter new values (max. 31
days) then press
LCD will display the message:
Press to confirm. LCD will display the message:
The lock can be blocked for maximum thirtyone (31) days.
To unblock a lock previously blocked press and hold
display the message:
Enter requested code. LCD will display the message:
Depending on lock setup Master code could be needed: enter Master code.

Test mode

Power up the keypad. Press and hold
message:
Enter the sequence of buttons displayed on the LCD.
Any working button will produce a short beep.
A damaged button will cause a long beep. LCD will display the
message.
M-LOCKS BV - Vlijtstraat 40 - NL-7005 BN Doetinchem - T +31 (0)314 376 876
Page 8
sales@m-locks.com - www.m-locks.com
to confirm.
. LCD will display the
. LCD will
. LCD will display the
BLOCK THE LOCK
X X – X X X X X X
BLOCK LOCK UNTIL
14/09 08:00
BLOCK LOCK UNTIL
DD/MM hh:mm
BLOCK THE
LOCK?
LOCK BLOCKED
UNBLOCK THE LOCK
X X – X X X X X X
OPERATION DONE
TEST MODE
1234567890 v
TEST MODE
1234567890 v
WRONG/FAULTY
KEY
IU_MiniTech_03