EM1620 §IMPORTANT INSTRUCTIONS • Before mounting the lock, please read the instructions for use carefully. • Ensure that you only program the lock when the safe is open. After changing the code, always try the code several times with the safedoor open.
It is recommended to prevent access to unauthorized persons to safety-relevant parts of the high- security lock when the safe is open . Par example by a with a screws fixed interior cover. The lock housing must be protected against destructive attacks from outside with suitable protective materials . www.m-locks.com...
Page 5
EM1620 MOUNTING INSTRUCTIONS Boltwork can be mounted on the bolt head if required. NEVER WELD ON BOLT OR BOLT EXTENSIONS! Mount the entry unit following the separate instruction. Insert the star washer (provided with the large handle) or the shaft guide washer depending on which handle is used.
Blocking element Motor Mounting dimensions Not standard Elektronics Power supply 9V ALKALINE Duracell, Duracell Industrial- or Energizer battery Software Codes 2 (6-digit) Manager Codes User Codes Battery low signal Manipulation protection 5 minute lock out after 4 consecutive wrong codes www.m-locks.com...