If a valid code has been entered, the lock electronics removes the blocking for 3 seconds and the boltwork can be moved into OPEN position by pushing the bolt inside the lock case. When moving the boltwork into LOCKED position the Rotobolt automatically secures. www.m-locks.com...
It is recommended to prevent access to unauthorized persons to safety-relevant parts of the high- security lock when the safe is open . Par example by a with a screws fixed interior cover. The lock housing must be protected against destructive attacks from outside with suitable protective materials . www.m-locks.com...
Page 5
Connect a 9V alkaline Duracell , Energizer or Duracell Industrial battery to the battery clip to the keyboard (or battery box) , and check the lock functions . Keep the cable from sharp edges or moving boltwork parts and set permanently . www.m-locks.com...
With door open, bring boltwork in LOCKED position: - Deadbolt must only be loaded at the locking point. - Avoid continuous pressure on the latch. Only after several positive function tests (opening / closing) the safedoor can be closed! www.m-locks.com...