Related Manuals for M-LOCKS E-Pass EP8050HL
Summary of Contents for M-LOCKS E-Pass EP8050HL
- Page 1 E-Pass EP8050HL EP8050HU User manual V01 EN M•LOCKS BV Vlijtstraat 40 • 7005 BN Doetinchem • The Netherlands • www.m-locks.com...
- Page 2 www.m-locks.com...
- Page 3 User audit Replacing the battery Troubleshooting The world of M-LOCKS M-LOCKS has extensive experience in this field and is a well-known, independent distributor and producer of high-security locks and locking systems for fire safes, security safes and doors. M-LOCKS' products are (nearly) invisible, but present everywhere.
-
Page 4: Important Instructions
By example with a lever or by turning the keypad. Please contact your safe supplier for more information about your specific situation. Caution! Don’t forget your code, the lock can not be used anymore! www.m-locks.com... -
Page 5: Symbols And Signals
Enter the code (i.e. 1-1-1-1-1-1), after entering a right code, you will hear a double tone and time delay starts. During time delay expires, the light flashes every 10 seconds. After time delay has elapsed, a double signal sounds and the open window starts. www.m-locks.com... -
Page 6: Changing Code (With The Door Open!)
For example! • Select your new personal code. Enter the new code • Enter the new code again If an incorrect code is entered on the second occasion, you will hear a long tone and the old code remains valid. www.m-locks.com... - Page 7 Caution! Only use 6-digits codes. DELETE CODE / USER Press and hold ‘3’ until you hear a double tone. The LED will illuminate when performing the following actions: • Enter your personal Manager Code The user has been deleted. www.m-locks.com...
-
Page 8: Setting The Time Delay And Opening Window Time
Press and hold ‘9’ until you hear a double tone. The LED will illuminate when performing the following actions: • Enter the Manager Code • Delete the delay and opening window time by entering 00 for the delay setting and 01 for the opening window time. www.m-locks.com... -
Page 9: Replacing The Battery
Remove the used battery and connect one (1) fresh bat- tery to the battery clip. Align cap in the little track of the housing and slide back on. Be careful not to pinch the battery cable. www.m-locks.com... -
Page 10: Troubleshooting
If one or more keys do not operate properly, please contact your supplier. c. I have forgotten my code For security reasons, M-LOCKS does not provide a code that you can use to open your lock. Please contact your supplier. - Page 11 E-Pass www.m-locks.com...
- Page 12 M•LOCKS BV Vlijtstraat 40 • 7005 BN Doetinchem • The Netherlands • www.m-locks.com...