Related Manuals for M-LOCKS E-Pass
Summary of Contents for M-LOCKS E-Pass
- Page 1 E-Pass EP1750 All versions User manual V02 EN M•LOCKS BV Vlijtstraat 40 • 7005 BN Doetinchem • The Netherlands • www.m-locks.com...
- Page 2 www.m-locks.com...
- Page 3 E-Pass CONTENT INSTRUCTIONS FOR USE Important instructions Symbols and signals Opening the lock Opening the lock with time delay Locking Changing code (with the door open!) Manager instructions Adding codes / users Disabling / enabling users Deleting codes / users...
-
Page 4: Important Instructions
• Depending on the used lock / keypad and the way the lock is installed, there are several ways to open and to close a cabinet. Please contact your cabinet supplier for more information about your specific situation. Caution! Don’t forget your code, otherwise the lock can not be used anymore! www.m-locks.com... -
Page 5: Symbols And Signals
E-Pass Caution! • The lock has been designed for use in a temperature range from +10˚C to +50˚C and a non- condensing humidity range from 30% to 80%. • It may only be cleaned with a moist cloth (do not use aggressive cleaning agents). -
Page 6: Changing Code (With The Door Open!)
• Enter the old code For example: • Select your new personal code. Enter the new code • Enter the new code again If an incorrect code is entered on the second occasion a long signal sounds and the old code remains valid. www.m-locks.com... -
Page 7: Disabling /Enabling Users
E-Pass MANAGER INSTRUCTIONS ADDING CODES / USERS With the manager code, up to nine additional opening codes can be added or deleted. Press and hold ‘1’ until a double signal sounds. The LED will illuminate when performing the following actions: •... - Page 8 • Enter the delay setting and opening window time. Time delay min. 01 - max. 99 minutes. Opening window time min. 01 - max. 19 minutes. In this example: 2602 for a delay of 26 minutes and an opening window time of 2 minutes • Enter the delay setting and opening window time again www.m-locks.com...
-
Page 9: User Configuration
E-Pass CCHANGING TIME DELAY AND OPENING WINDOW The delay setting can be changed or deleted during the opening window time. Enter a valid code. After the delay period the opening window time starts. The light flashes and the lock beeps every second. -
Page 10: Replacing The Battery
If one or more keys do not operate properly, please contact your supplier. c. I have forgotten my code For security reasons M-LOCKS does not provide a code that you can use to open your lock. Please contact your supplier. - Page 11 E-Pass www.m-locks.com...
- Page 12 M•LOCKS BV Vlijtstraat 40 • 7005 BN Doetinchem • The Netherlands • www.m-locks.com...
Need help?
Do you have a question about the E-Pass and is the answer not in the manual?
Questions and answers