Table of Contents
Advertisement
2.
Do not overreach and do not cut above shoulder
height. This helps prevent unintended tip contact and
enables better control of the chainsaw in unexpected
situations.
3.
Only use replacement bars and chains specified by the
manufacturer. Incorrect replacement bars and chains
may cause chain breakage and/or kick-back.
Follow the manufacturer's sharpening and
4.
maintenance instructions for the saw chain.
Decreasing the depth gauge height can lead to
increased kick-back.
Additional safety warnings
1.
It is recommended that first-time users should, as a
minimum practice, cut logs on a saw-horse or cradle.
Clothing and protective equipment
1.
Do secure long hair so that it is above shoulder level.
2.
Do not wear loose fitting clothing or jewellery as this
could be drawn into the motor, catch the chain or
undergrowth.
3.
Use the following safety clothing and protective
equipment when operating the product:
-
Helmet with visor and neck guard (compliant to EN
397)
-
Hearing protectors
-
Breathing mask
-
Gloves with approved saw protection (compliant to EN
381-4, EN 381-7, EN 420:1, EN 388 Class 3)
-
Protective leggings with approved saw protection
(compliant to EN 381-5, EN 340 Class 1)
-
Steel toe cap boots with approved saw protection
(compliant to EN ISO 20345 Class 2)
-
First aid kit in case of injury.
Charger safety warnings
1.
This charger is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
9
Advertisement
Table of Contents
