Table of Contents
Advertisement
1.
Only use the product as intended by its design and
these instructions.
2.
Ensure that the product is in good condition and well
maintained.
3.
Use correct attachments for the product and ensure
they are in good condition.
4.
Keep a tight grip on the handles/gripping surface.
5.
Maintain this product in accordance with these
instructions and keep it well lubricated (where
appropriate).
6.
Plan your work schedule to spread any high vibration
tool use across a longer period of time.
7.
Prolonged use of the product exposes the user to
vibrations that can cause a range of conditions
collectively known as hand-arm vibration syndrome
(HAVS) e. g. fingers going white; as well as specific
afflictions such as carpal tunnel syndrome.
-
To reduce this risk when using the product, always
wear protective gloves and keep your hands warm.
-
The symptoms of HAVS include any combination of
the following: Tingling and numbness in the fingers;
Not being able to feel things properly; loss of strength
in the hands; fingers going white (blanching) and
becoming red and painful on recovery (particularly in
the cold and wet, and probably only in the tips at first).
Seek medical advice immediately if such symptoms
are experienced.
Emergency
Familiarise yourself with the use of this product by means
of this instruction manual. Memorise the safety directions
and follow them to the letter. This will help to prevent risks
and hazards.
1.
Always be alert when using this product, so that you
can recognise and handle risks early. Fast intervention
can prevent serious injury and damage to property.
2.
Switch off and disconnect from the power supply if
there is any malfunctions. Have the product checked
by a qualified specialist and repaired, if necessary,
before you put it into operation again.
12
Advertisement
Table of Contents
