Download  Print this page

Explanation Of Parameters - Siemens DQ 4x24VDC/2A HS User Manual

Simatic et 200sp digital output module.
Hide thumbs

Advertisement

Parameters/address space

4.2 Explanation of parameters

4.2
Explanation of parameters
Operating mode
Specifies for the entire module the operating mode in which the channels of the module are
operated. If you configure using a GSD file, you decide the module operating mode by
selecting the module name in the GSD file.
● Normal operation as digital output module
– Valve control is a special function of normal operation, see section Normal
● Pulse width modulation, see section Pulse width modulation (Page 19)
● Oversampling, see section Oversampling (Page 23)
See section Address space (Page 25).
Output rate
Specifies the number of sub-cycles per isochronous data cycle.
See section Oversampling (Page 23).
Diagnostics: No supply voltage L+
Enabling of the diagnostics for no or insufficient supply voltage L+.
Diagnostics: Short-circuit
Enabling of the diagnostics when a short-circuit of the actuator supply occurs.
Diagnostics: Overflow
Enabling of the diagnostics when the permitted value range of the duty factor is exceeded
during pulse width modulation.
See section Pulse width modulation (Page 19).
Channel activated
Determines whether a channel is activated or deactivated.
Reaction to CPU STOP
Determines the behavior of the module in the event of a CPU STOP.
16
operation/Valve control (Page 18).
Digital output module DQ 4x24VDC/2A HS (6ES7132-6BD20-0DA0)
Manual, 03/2015, A5E34944434-AA

Advertisement

   Related Manuals for Siemens DQ 4x24VDC/2A HS

Comments to this Manuals

Symbols: 0
Latest comments: