Table of Contents
Advertisement
Properties
The module has the following technical properties:
● Digital output module with 4 outputs (push-pull)
● Source output (PNP, sourcing output)
● Supply voltage L+
● Output current 2 A (per channel)
● Configurable substitute values (per channel)
● Configurable diagnostics (per module)
● Suitable for solenoid valves, DC contactors, and indicator lights
The module supports the following functions:
● Firmware update
● I&M identification data
● Reconfiguration in RUN
● PROFIenergy
● Value status
● Isochronous mode
● Oversampling
● Valve control
● Pulse width modulation
You can configure the module with STEP 7 and with a GSD file.
Accessories
The following accessories must be ordered separately:
● Labeling strips
● Color identification labels
● Reference identification label
● Shield connector
See also
You can find more information on accessories in the ET 200SP distributed I/O system
(http://support.automation.siemens.com/WW/view/en/58649293) system manual.
Digital output module DQ 4x24VDC/2A HS (6ES7132-6BD20-0DA0)
Manual, 03/2015, A5E34944434-AA
Product overview
2.1 Properties
9
Advertisement
Table of Contents
