Table of Contents
Advertisement
Parameters/address space
4.1
Parameters
DQ 4×24VDC/2A HS parameters
The effective range of the configurable parameters depends on the type of configuration.
The following configurations are possible:
● Central operation with a CPU ET 200SP
● Distributed operation on PROFINET IO in an ET 200SP system
● Distributed operation with PROFIBUS DP in an ET 200SP system
When assigning the parameters in the user program, the "WRREC" instruction transfers the
parameters to the module using data records; see section Parameter assignment and
structure of the parameter data record (Page 39).
The following parameter settings are possible:
Table 4- 1
Configurable parameters and their defaults (GSD file)
Parameter
Operating mode
•
•
Output rate
Normal operation and pulse
width modulation:
•
Oversampling:
•
•
•
•
Diagnostics:
•
No supply voltage L+
•
Diagnostics:
•
Short-circuit
•
Digital output module DQ 4x24VDC/2A HS (6ES7132-6BD20-0DA0)
Manual, 03/2015, A5E34944434-AA
Range of values
Normal operation DQ
(valve con-
trol)/Oversampling
2
Pulse width modulation
1 Sample/cycle
2 Sample/cycle
4 Sample/cycle
...
32 Sample/cycle
Disable
Enable
Disable
Enable
3
Default
Reconfigu-
ration in
No
Normal operation
DQ (valve control)\
Oversampling
1 Sample/cycle
No
Disable
Yes
Disable
Yes
Effective range with configuration
software, e.g. STEP 7
RUN
GSD file
PROFINET IO
Module
Module
Module
Module
4
GSD file
PROFIBUS DP
1
Module
1
Module
1
Module
1
Module
1
13
Advertisement
Table of Contents
