Maintenance - Advantech-DLoG DLT-V6210 Safety Instructions

Cables
Be sure that nothing rests on power cable

and the cable is not located in where it
can be tripped over or stepped on.
When you disconnect any cable, pull on

its connector or on its strain relief loop.
Do not pull on the cable itself. As you pull

out the connector, keep it evenly aligned
to avoid bending any connector pin.
Also, before you connect any cable,

please make sure that both connectors
are correctly oriented and aligned.
If strain relief is present, it must be used

6

Maintenance

Only the DLT-V6210 manufacturer and its
authorized service centers may:
− Conduct repairs.
− Carry out modifications.
− Replace modules.
− Open the device.
The legal warranty shall apply. It expires if
customer performs measurement on the
device which is only permitted to be
performed by the manufacturer and it's
authorized Service Centers.
WARNING
On vehicles: Risk of accident due to
unstable attachment of the DLT-V6210;
regular inspection is necessary.
If the attachment of the DLT-V6210 becomes
loose and breaks during operation or
movement, this can lead to severe accidents.
Page 6 / 8 Safety instructions DLT-V6210, V1.00, PN 2005621030
Safety Instructions
DLT-V6210 Industrial PC
Regularly check whether the DLT-V6210

is firmly seated in the associated holder
(RAM mount, mounting bracket) and the
mounting screws are not loose.
Check whether all connected cables are

secured and the cable cover shuts tightly.
A regular inspection and maintenance of

the entire system is necessary.
Hazardous voltage, electrical shock from
contact with live parts when cleaning.
To prevent electrical shock while cleaning the
device:
Switch off the DLT-V6210 before

cleaning.
Disconnect the DLT-V6210 from power

supply.
Disconnect all accessories which are in

connection with the DLT-V6210.
NOTICE: Physical damage
Cleaning the touchscreen and housing
Clean the housing with a damp cloth.

Wipe off the touchscreen using a soft, lint-

free cloth; use a neutral glass cleaner
(that does not contain ammonia or
isopropyl alcohol) and apply it to the cloth;
do not apply directly to the touchscreen.
Never use chemical solvents to clean the

touchscreen.
Do not use acidic or alkaline solutions.

Opening of the antenna cap to gain
access to the CFast, e.g. for software
updates.
Open the antenna cap carefully.

Pull the antenna cap straightly upwards,

otherwise you might damage the Wi-Fi
unit.
 DLoG GmbH, 2016