Commissioning - Advantech-DLoG DLT-V6210 Safety Instructions

Safety Instructions
DLT-V6210 Industrial PC
4

Commissioning

Required qualification.
Only qualified skilled personnel are permitted
to commission the DLT-V6210.
Observe especially before
commissioning on vehicles
(forklifts etc.)
WARNING
Observe the vehicle manufacturer's
instructions.
Observe the vehicle manufacturer's

instructions about the installation of
peripheral devices.
This is particularly important when

welding or drilling load bearing parts.
Observe the manufacturer's instructions

for connecting additional loads, for
instance, in conjunction with an
emergency shut-off switch.
Be sure that the connection of the power

supply cables is as direct as possible to
the battery and not to power supply
cables with a great deal of interference
(e.g. the motor power supply) or
otherwise affected by consumers.
Please make sure that users' field of

vision is not restricted in a prohibited way
when mounting the DLT-V6210.
Risk of accident due to unstable
attachment of the DLT-V6210.
When installing the DLT-V6210, please

make sure no one will be injured if the
 DLoG GmbH, 2016 Safety instructions DLT-V6210, V1.00, PN 2005621030
bracket breaks (e.g. because of a stress
fracture).
Alternatively put appropriate safety

measures in place (e.g. install a security
cable in addition to the mounting bracket).
Electrical shock due to insufficient
EMERGENCY shut-off mechanism.
If the EMERGENCY-OFF switch of
application environment does not switch off
the DLT-V6210, there is a risk of causing
electrical shock.
Install the EMERGENCY-OFF switch on

the DLT-V6210 so that the DLT-V6210
will be switched off when the
EMERGENCY-OFF switch is operated.
Observe before commissioning (general
– mobile and stationary use)
WARNING
Hazardous voltage, electrical shock from
contact with live parts.
Do not put the DLT-V6210 into operation

if it is damaged.
Do not open or modify the DLT-V6210.

Only connect or disconnect electrical

connections when the device is in a de-
energized state (electrically dead).
Electrical shock due to lack of
disconnecting device.
The DLT-V6210 is not equipped with
disconnecting devices that are accessible
from the outside; it does not have switches.
To enable the device to be quickly
disconnected from the power supply in
emergency situations:
Page 3 / 8