Technical Data - Hirschmann RSR20-0900 User Manual

7

Technical Data

General technical data

Dimensions RSR20-.../RSR30-...
W × H × D incl. wall mounting plate
Weight RSR20-.../RSR30-...
Supply voltage Rated voltage AC
with characteristic Voltage range AC
value K Rated voltage DC
Voltage range DC
Connection type
Power loss buffer
Back-up fuse for each
voltage input
peak inrush current
Supply voltage Rated voltage DC
with characteristic Voltage range DC
value C Connection type
Power loss buffer
Back-up fuse for each
voltage input
peak inrush current
Signal contact Rated value for AC
Rated value for DC
Connection type
Climatic Minimum clearance
conditions during around the device
operation
Ambient air
temperature
Humidity
Air pressure
Climatic Ambient air temperature
conditions during
Humidity
storage
Air pressure
Pollution degree
Protection classes Laser protection
Protection class
a. Temperature of the ambient air at a distance of 2 inches (5 cm) from the device
b. Hirschmann recommends to use SFP transceivers with the "EEC" extension.
c. Use only SFP transceivers with the "EEC" extension, otherwise the standard temperature
range applies.
d. Use the the following maximum number of SFP transceivers with the RSR30-0703... device:
- at an ambient temperature of 185 °F (85 °C): max. 6 SFP transceivers
- at an ambient temperature of 167 °F (75 °C): max. 8 SFP transceivers
- at an ambient temperature of 158 °F (70 °C): max. 10 SFP transceivers
54
4.72 × 5.39 × 4.53 in. (120 × 137 × 115 mm)
4.72 × 5.7 × 4.53 in. (120 × 145 × 115 mm)
approx. 2.2 lb
110 - 230 V, 50 - 60 Hz
90 - 265 V, 47 - 63 Hz (incl. max. tolerances)
60 - 250 V DC
48 - 320 V (incl. max. tolerances)
3-pin terminal block
> 10 ms at 98 V AC
Nominal rating:
Characteristic:
8 A
24 - 48 V
18 - 60 V (incl. max. tolerances)
3-pin terminal block
> 10 ms at 20.4 V DC
Nominal rating:
Characteristic:
15 A
2 A at 230 V AC
2 A at 30 V DC
0.2 A at 125 V DC
0.1 A at 250 V DC
2-pin terminal block
Top and bottom device side: 3.94 in (10 cm)
Left and right device side: 0.79 in (2 cm)
Devices with operating temperature characteristic
a
. value S (Standard):
+32 °F ... +140 °F (0 °C ... +60 °C)
Devices with operating temperature characteristic
value U and F (Extended):
−40 °F to +185 °F (−40 °C ... +85 °C)
10 % ... 95 %
Up to 2000 m (795 hPa), higher altitude on request
b
−40 °F to +185 °F (−40 °C to +85 °C )
10 % ... 95 %
Up to 2000 m (795 hPa), higher altitude on request
2
Class 1 in compliance with IEC 60825-1
IP30
(1 kg)
2.5 A
slow blow
6.3 A
slow blow
b
(non-condensing)
(non-condensing)
Installation RSR20/RSR30
Release 04 10/2015
c d
,