3
Technical data
General technical data
Dimensions
W x D x H
Weight
Power supply
Overload current
protection at input
Insulation voltage
between operating
voltage connections
and housing
"FAULT"
signal contact
Environment
Operating
temperature
Pollution degree
Protection classes
a. Only use SFP modules with the "EEC" extension.
34
RS20-08..., RS20-09..., RS30-0802
RS20-16..., RS20-17..., RS30-1602
RS20-24..., RS20-25..., RS30-2402
RS20-08..., RS20-09..., RS30-0802
RS20-16..., RS20-17..., RS30-1602
RS20-24..., RS20-25..., RS30-2402
Operating voltage
Rated voltage range DC
Rated voltage range AC
Max. voltage range DC
Max. voltage range AC
Switching current
Switching voltage
Storage temperature
(ambient air)
Humidity
Air pressure
Standard
Extended
Laser protection
Degree of protection
74 mm x 131 mm x 111 mm
110 mm x 131 mm x 111 mm
110 mm x 131 mm x 111 mm
410 g
600 g
650 g
12 to 48 V DC
24 V AC
Safety extra-low voltage (SELV),
redundant inputs disconnected.
Relevant for North America: NEC
Class 2 power source max. 5A.
min. 9.6 to max. 60 V DC
min. 18 to max. 30 V AC
(Not applicable under UL
regulations)
Non-replaceable fuse
800 V DC
Protective elements limit the
insulation voltage to 90 V DC (1 mA)
max. 1 A, SELV
max. 60 V DC or max. 30 V AC,
SELV
Standard: -40 °C to +70 °C
(-40 °F to +158 °F)
Extended: -40 °C to +85 °C
10% to 95%
(non-condensing)
Up to 2000 m (795 hPa), higher
altitudes on request
0 °C to +60 °C (+32 °F to +140 °F)
−40 °F ... +158 °F
a
(−40 °C ... +70 °C)
2
Class 1 according to IEC 60825-1
(2007)
IP 20
RS20/RS30...U
Release 01 06/2012