1
Description
1.1
General description of the device
You can choose from between a wide range of variants. You have the option
to set up your device individually based on different criteria:
Number of Ports
Data Rate
Types of connectors
Temperature range
Supply voltage range
Approvals
The RSR20/RSR30 devices are designed for the special requirements of
industrial automation. They meet the relevant industry standards, provide
very high operational reliability, even under extreme conditions, and also
long-term reliability and flexibility.
The devices allow you to set up switched industrial Ethernet networks that
conform to the IEEE 802.3 standard.
The devices work without a fan.
If desired, the power is supplied redundantly.
The following installation options are available:
simply snapping them onto a DIN rail
Mounting on a flat surface
You have the option of choosing various media to connect to the end devices
and other network components:
twisted pair cable
multimode F/O
singlemode F/O
The ring redundancy concept allows the network to be reconfigured quickly
after a failure.
This gives you a quick overview of the product configuration through:
diagnosis displays
displaying the operating parameters
a label area for the IP address
There are convenient options for managing the device. Administer your
devices via:
a Web browser
Telnet
SSH
16
Installation RSR20/RSR30
Release 04 10/2015