Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Norac Manuals
  4. Controller
  5. UC5 Topcon X30
  6. Installation manual

Norac UC5 Installation Manual

Spray height controller
Hide thumbs Also See for UC5:

Advertisement

Quick Links

Download this manual See also: Operator's Manual, Installation Manual
Spray Height Controller
John Deere
(30 Series Main Lift Option)
Installation Manual
JD09

Advertisement

loading
Need help?

Need help?

Do you have a question about the UC5 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Norac UC5

Summary of Contents for Norac UC5

  • Page 1 Spray Height Controller John Deere (30 Series Main Lift Option) Installation Manual JD09...
  • Page 2 Reorder P/N: UC5-JD09-INST Rev A (John Deere 30 Series Main Lift Option) NOTICE: NORAC Systems International Inc. reserves the right to improve products and their specifications without notice and without the requirement to update products sold previously. Every effort has been made to ensure the accuracy of the information contained in this...

  • Page 3: Table Of Contents

    Contents Introduction......................1 Kit Parts........................2 Hydraulic Installation....................4 Electrical Installation ....................7 Software Setup ......................8 Cable Drawings ......................9...

  • Page 4: Introduction

    1 Introduction Congratulations on your purchase of the NORAC UC5 Spray Height Controller. This system is manufactured with top quality components and is engineered using the latest technology to provide operating reliability unmatched for years to come. When properly used the system can provide protection from sprayer boom damage, improve sprayer efficiency, and ensure chemicals are applied correctly.

  • Page 5: Kit Parts

    2 Kit Parts Hydraulic Plumbing Figure 1: JD09 Hydraulic Plumbing...
  • Page 6 44863-23 HOSE ASSEMBLY 122R2-06 32 IN L 6FORX 6FORX 44865-37 HYDRAULICS FITTING KIT - JD9 UC5-JD09-INST MANUAL INSTALLATION UC5 MAIN LIFT OPTION JOHN DEERE (30 SERIES) 44952D VALVE ASSEMBLY EXPANSION DPC PROP DT Hydraulic Fitting Kit Details (P/N: 44865-37) Item...

  • Page 7: Hydraulic Installation

    Hydraulic pressure will exist on the main lift circuit unless the main lift is all the way down. Component failure due to oil contamination is not covered under the NORAC UC5 system warranty. It is recommended that a qualified technician perform the hydraulic installation.
  • Page 8 Figure 3: Assembly of Two Expansion Blocks 8. Remove all plastic plugs from the NORAC expansion valve block (V01). 9. Install the orifice (F08) and the 6MB 6MOR fitting (F05) into the “B” port of the expansion block. 10. Install the 6MBP plug (F09) into the “A” port of the expansion block.
  • Page 9 11. If the valve block is not already installed on the sprayer, install it as outlined in the UC5 Spray Height Control installation manual. 12. Attach hose H01 to the “B” port on the expansion block. Route the free end of the hose to the John Deere valve block.

  • Page 10: Electrical Installation

    2. Remove the plugs installed in positions 5 and 6. 3. Connect the 2 pin connector on cable C10 into positions 5 and 6 on the valve module. 4. Connect the other end of cable C10 to the 2 pin connectors on the NORAC expansion block. Output Number...

  • Page 11: Software Setup

    3. Turn on the power for the display terminal using the switch on the side. 4. Refer to the UC5 Spray Height Control Operator’s Manual to run an automatic install with the “John Deere 30 Series Main Lift Option” type selected.

  • Page 12: Cable Drawings

    6 Cable Drawings ITEM C10: 43230-04a – CABLE UC5 VALVE DT TO DT...
  • Page 13 Canada NORAC Systems International Inc. Phone: (+1) 306 664 6711 Toll Free: 1 800 667 3921 Shipping Address: 3702 Kinnear Place Saskatoon, SK S7P 0A6 United States NORAC, Inc. Phone: (+1) 763 786 3080 Toll Free: 1 866 306 6722...