Page 2
Reorder P/N: Pulse-HG06-HG07-INST Rev D (PULSE Display Kit - Hagie) NOTICE: NORAC Systems International Inc. reserves the right to improve products and their specifications without notice and without the requirement to update products sold previously. Every effort has been made to ensure the accuracy of the information...
Page 4
1 Introduction The PULSE™ Display Kit Manual is intended to be used in conjunction with the UC5™ Spray Height Control Installation Manual. This manual provides instructions to interface the UC5 Control Module to the PULSE Display. For installation of the rest of the UC5 Spray Height Control System please refer to the sprayer specific manual provided with the kit.
Page 5
2 Installation Ensure the PULSE power switch is OFF for the remainder of the installation (Bottom of switch pressed IN). 1. Install the PULSE™ display in the cab of the sprayer where it will be clearly visible and within easy reach of the operator. When installing the PULSE, it is recommended to install it no closer than 1 (one) meter (40 inches) from 2-way radio antennas.
Page 7
TOPCON Agriculture Canada 3702 Kinnear Place Saskatoon, SK S7P 0A6 TOPCON Agriculture Americas W5527 Hwy 106 Fort Atkinson, WI 53538 TOPCON Precision Agriculture Europe Avenida de la industria, 35, Tres Cantos, España Spain Support Phone: 888 979 9509 E-mail: tasupportn@topcon.com Web: www.norac.ca...
Need help?
Do you have a question about the UC5 and is the answer not in the manual?
Questions and answers