Cleaning The Gas Valve Vent Tube - Pitco SG Series Solstice Service Manual

Pitco Solstice and Solstice Supreme High Efficiency Gas Fryers
Cleaning the Gas Valve Vent Tube
1. Bend the gas valve vent tube to allow for
removal.
2. Loosen nut at the base of the vent tube with a
3/8 inch open-ended wrench and then remove.
SG/SSH Series Service Manual
3. Clean the tube (not shown) and reinstall.
NOTE:
13
Make sure the vent tube is not
reinstalled in an upright position
and there are no kinks in the tube.