Replacing The Pump Relay - Pitco SG Series Solstice Service Manual

Pitco Solstice and Solstice Supreme High Efficiency Gas Fryers
Replacing the Pump Relay
1. Remove the two (2) screws, which hold the
pump relay, using a Phillips screwdriver.
SG/SSH Series Service Manual
2. Remove all wires on the pump relay using
needle-nose pliers. See "Simplified Wiring
Diagrams on page 89.
3. Remove the pump relay.
4. Reinstall the new pump relay by following steps
1 through 2 in reverse.
76