Radio-Text - Renault Radio Connect R & GO Manual

SYSTEM SETTINGS (3/3)
"BT settings" (Bluetooth®)
Go to the phone menu by pressing 10,
then select the section "BT Settings" by
pressing 5 or by turning 20 or 25and
pressing 22 on the steering column
control.
The available settings are:
– "Volume": adjustment of the ringtone
or call volume;
– "Ringtones": activation of the vehi-
cle's ringtone or of that transferred
from the phone;
To adjust the volume of the ringtone
when a Bluetooth® phone is connected
to the audio system, select "Volume" by
turning and pressing 5, or by turning 20
or 25 and pressing 22 on the steering
column control.
A new sub-menu appears:
– "Ringtone";
– "Call";
Pressing 6 takes you back to the
previous menu.
GB.32
– select one of the two items, by turn-
ing 5, 20, 22 or 25, then press 5, 20
or 22 on the steering column control;
– turn 5, 20, 22 or 25 left or right to
raise or lower the volume, then con-
firm by pressing 5;
To activate the ringtone on the vehi-
cle or the phone via Bluetooth®, select
"Ringtones" by turning 5, 20, 22 or 25
and pressing 5, 20 or 22 on the steering
column control.
A new sub-menu appears:
– "Car";
– "Phone";
– select one of the two items to be ac-
tivated by turning 5 and then press 5.
Note: for a phone paired to the audio
system, a new item appears in the
menu: "BT settings":
– "Update phonebook": updating of
the phonebook of the phone paired
to the audio system (e.g. addition of
new contacts not yet in the system).
– to update the phonebook on the
audio system, access the "BT set-
tings" menu by pressing 10, then
select "Update phonebook" by
pressing 5, 20 or 22 on the steering
column control.
Display of radio texts
Display the radio text menu by press-
ing 14. Select "Radio", then press 5, 20
or 22 on the steering column control.
The radio texts display may contain a
maximum of 64 characters.
NB: if there is no information provided,
the screen displays "No message".
For safety reasons, carry
out any adjustments when
the vehicle is stationary.