R & Go: Vehicle Function - Renault Radio Connect R & GO Manual

R & GO: VEHICLE FUNCTION
Introduction to the «Car»
menu
To access the «Car» menu, from the
main menu, press the «Menu» icon,
then «Car».
The system is made up of four main
sections, all of which can be accessed
from the vehicle menu:
– Driving Eco² ;
– fuel consumption;
– rev counter (rpm x 1000);
– "Services" displays the dashboard
information.
(1/2)

«Driving Eco²»
from the «Car» menu, press the
«Driving Eco²» icon. The «Driving Eco²»
function displays a real-time overall
score that reflects your driving style.
This score takes the following criteria
into account:
– acceleration;
– the ability to anticipate braking;
– compliance with speed limits.
You can see your overall score and
personalised advice at the end of every
trip.
You can also check:
– the distance travelled without bur-
ning fuel;
– the scores for your last ten trips.
Note: Depending on the telephone, the
"Driving Eco²" application no longer re-
cords your scores in the background.
NB: Press the "Reset" button on the in-
strument panel to start a new journey
once the application has launched.
A journey has to be more than 400
metres to be taken into account. If the
time between the stopping and starting
the engine is less than four hours, the
application continues to take the jour-
ney into account before stopping.
For safety reasons, carry
out any adjustments when
the vehicle is stationary.
GB.45