Parameter Data Record; Dependencies When Configuring With Gsd File - Siemens SIMATIC ET 200SP Manual

Parameter data record

A.1

Dependencies when configuring with GSD file

When configuring the module with a GSD file, remember that the settings of some
parameters are dependent on each other.
Configuring with a PROFINET GSD file
The table lists the properties and their dependencies on the measurement type and
measuring range for PROFINET.
Table A- 1 Dependencies of the measurement type / measuring range
Measurement Measuring range
type
Deactivated *
Voltage ±50 mV, ±80 mV,
±250 mV, ±1 V
Resistor 150 Ω, 300 Ω,
(2, 3, 4-wire con- 600 Ω, 3 kΩ, 6 kΩ
nection)
Resistor PTC
(2-wire connec-
tion)
Thermal resistor Pt100 climatic
(2, 3, 4-wire con-
nection)
Pt200
Pt500
Pt1000 climatic
Ni100
Ni120
Ni200
Ni500
Ni1000 climatic
LG-Ni 1000 cli-
matic
Analog input module AI 4xRTD/TC 2-/3-/4-wire HF (6ES7134-6JD00-0CA1)
Manual, 09/2018, A5E03573289-AE
Temperature coef- Reference junction Temperature unit
ficient
* *
* *
* *
* *
Pt 0.00385055 Reference channel
Pt 0.003916 of group 0, 1, 2, 3
Pt 0.003902
No reference
Pt 0.00392
channel mode
Pt 0.00385
No reference
channel mode
Ni 0.00618
Ni 0.00672
LG-Ni 0.005
Conductor re-
sistance
* *
* *
* x (with 2-wire
connection)
* *
Degrees Celsius x (with 2-wire
connection)
Degrees Celsius
Degrees Fahren-
heit
Degrees Celsius
Degrees Fahren-
heit
A
53