Siemens SIMATIC ET 200SP Manual page 55

Parameter data record
A.1 Dependencies when configuring with GSD file
Measurement Measuring range
type
(3-wire connec- Cu 10 climatic
tion)
Thermal resistor Pt100
(2, 3, 4-wire con- Pt200
nection) Pt500
Pt1000 standard
Ni100
Ni120
Ni200
Ni500
Ni1000 standard
LG-Ni 1000
standard
Thermal resistor Cu 10 standard
(3-wire connec-
tion)
Thermocouple Type B, N, E, R,
S,
J, L, T, K, U, C,
TXK
x = property is allowed, – = property is not allowed, * = property is not relevant
Use of "Reference channel of the module":
1
- Channel 0 must be set as "Pt100 climatic" with temperature unit: "Degrees Celsius".
-For each TC channel of this module that is intended to use channel 0 as reference, "Reference junction" must be set to
"Reference channel of the module".
Use of "Reference channel of group 0, 1, 2, 3":
2
- An RTD channel must be set as "Pt100 climatic" with temperature unit: "Degrees Celsius".
- "Reference channel of group 0, 1, 2, 3" must be set as the "Reference junction" of this channel.
- There must only be one RTD channel with "Reference junction" = "Reference channel of group 0, 1, 2, 3" per group 0,
1, 2, 3 and IO device!
- For each TC channel in the IO device that is intended to use this reference, "Reference junction" must be set to "Ref-
erence channel of group 0, 1, 2, 3".
- If the reference channel is on channel 0, it can also be used as "Reference channel of the module" at the same time.
54
Temperature coef- Reference junction Temperature unit
ficient
Cu 0.00427
Pt 0.00385055 No reference
Pt 0.003916 channel mode
Pt 0.003902
Pt 0.00392
Pt 0.00385
Ni 0.00618
Ni 0.00672
LG-Ni 0.005
Cu 0.00427
* Reference channel
of the module
Internal reference
junction
Reference channel
of group 0, 1, 2, 3
Fixed reference
temperature
Analog input module AI 4xRTD/TC 2-/3-/4-wire HF (6ES7134-6JD00-0CA1)
Degrees Celsius
Degrees Fahren-
heit
Kelvin
Degrees Celsius
1
Degrees Fahren-
heit
Kelvin
2
Manual, 09/2018, A5E03573289-AE
Conductor re-
sistance
*
x (with 2-wire
connection)
*
*