9.6 Weighing with tolerance range (FOB, FOB-LM models only)
You can set an upper or lower limit when weighing with tolerance range and thus
ensure that the weighed load remains exactly within the set limits.
During tolerance tests such as dosing, portioning and sorting the unit will indicate
exceeded or undershot limits by emitting an optical or acoustic signal.
Displayed
Weight of the weighed
triangle next to
item
Target weight within
tolerance range
Target weight below lower
-
tolerance limit
Target weight above upper
tolerance limit
+
If <Err> is displayed, the
maximum load of the
balance is exceeded.
32
Optical signal /
Acoustic signal
background
illumination of the
display
2 short beeps
no beep
perpetual tone
FOB-BA-e-1820