Assembly Or Disassembly Of The Protection Hood; Battery Operation - KERN FOB 500-1S Operating Manual

7.3.1 Assembly or disassembly of the protection hood

7.4 Battery operation

Remove battery cover at the lower side of the housing. Insert Battery, see. Chap. 1
"Technical Data".
Put battery cover back in place and tighten it.
Illustration example:
FOB-NS
When you tighten the battery cover, make sure that not too much pressure
is put on the weighing plate. The load cell may be damaged.
22

Unlock weighing pan in the
direction of the arrow

Remove or replace the protection
hood
FOB-NL, FOB-LM
FOB-BA-e-1820