Fob-Ba-E - KERN FOB 500-1S Operating Manual

Call function:
• Press and hold the HOLD key for three seconds in the weighing mode. The
tolerance weighing mode is displayed.
The display for entering the lower limit value appears, the first digit flashes. The
lower tolerance mark
Set limit values:
• To change the flashing digit, press the TARE button repeatedly until the desired
value is displayed. Select the next digit with the UNIT key and set the value with
the TARE key.
• Repeat process for each digit.
• Confirm entry with the HOLD key. The display for entering the upper limit value
appears, the first digit flashes. The upper tolerance mark
display lights red.
• To change the flashing digit, press the TARE button repeatedly until the desired
value is displayed. Select the next digit with the UNIT key and set the value with
the TARE key. Repeat process for each digit.

FOB-BA-e-1820

is displayed.
is displayed. The
33