Table of Contents
Advertisement
Chapter 5
Install the AADvance System
116
Figure 21 - Digital Output Termination Assembly Wiring
• Apply a minimum tightening torque of 0.5 Nm (0.37 ft. lb.) to the
terminal screws.
Recommended Circuit for Analogue Outputs
These circuits are suitable for simplex and dual configurations of analogue
output modules. All channels are isolated from each other but may be bridged
at the '+' terminal if fed by a common system mounted supply.
Rockwell Automation Publication ICSTT-RM448J-EN-P - April 2018
Advertisement
Table of Contents
