Maintenance - JMA Berna Instruction Manual

1.- INTRODUCTION AND OVeRVIeW
1.1 oVerView
1.2 transPort and PacKaging
1.3 id label
2.- MACHINe CHARACTeRISTICS
2.1 KeY terMs
2.2 PrinciPal Machine Parts
2.3 technical inForMation
2.4 coMPonents and worKing Parts
2.4.1 accessories
2.4.2 electric circuit
2.4.3 Four sided clamp
3.- OPeRATION AND FUNCTIONS
3.1 dePth regulation
3.2 lateral regulation
3.3 KeY cutting
3.3.1 duplicating narrow keys
3.3.2 duplicating stop-less keys
3.3.3 duplicating cross keys

4.- MAINTeNANCe

4.1 rePlacing the brush
4.2 rePlacing the cutter
4.3 rePlacing the dePth Probe
4.4 adJusting the MaXiMuM carriage dePth
4.5 rePlacing the Fuses
4.6 rePlacing the on/oFF switch and the brush button
4.7 rePlacing the belt
4.8 rePlacing the Motor
4.9 rePlacing the Motor caPacitor
4.10 accessing inside the carriage
4.11 tightening the carriage sPring
4.12 rePlacing the Microswitches
5.- SAFeTY
6.- WASTe DISPOSAL
6.1 PacKing
6.2 swarF
6.3 Machine
7.- eXPLODeD VIeW