Reports; Closing The Day; Automatic Sending Of Transactions - Ingenico ICT220 User Manual

Enter the number of receipt that you wish to reverse and then press the green key (ENTER).
Where the receipt number is not entered, the terminal shall print out the last receipt.
Where no receipt is found "KVIITUNG PUUDUB" message is displayed.
Tear off the receipt and press any key.
Note:

Repeated printout is only possible with regard to transactions performed on the same day.
6.

REPORTS

The terminal is in the standby mode.
Press F1 key
From the menu select "Info" (to navigate through the menu use ▼ ▲ keys or F2 and F3
keys) and then press the green key (ENTER) to confirm.
Select SAATMISKOON if you wish to receive a copy of the previous sending report
Select HETKETEHINGUD if you wish to receive today's report, without sending
transactions.
Select VAATAN TEHINGUID if you wish to receive more information on a specific
receipt.
7.

CLOSING THE DAY

7.1

AUTOMATIC SENDING OF TRANSACTIONS

Daily transactions can be sent to the bank either automatically or manually. Automatic sending is performed at the time
programmed in the terminal. While automatic sending is in process no transaction can be performed!
At the end of the communication session the terminal shall issue the report that demonstrates the number of transactions and
the total sum.
SAATMISKOOND
Nr 1
Saatmise aeg: 01.01.2011 01:00:00
FIRMA NIMI
AADRESS
Terminal: HPC11111 Reg: 12345673 Kassa: 101
Valuuta: EUR (978)
Set "VISA"
Tehingud 1
Tühistamisi 1
Kokku 2
Tehingud 1
Tühistamisi 1
Kokku 2
Received 1 pcs, 0.00 units
Tehingute saatmine OK
ACTION
3.19
-3.19
0.00
3.19
-3.19
0.00
15
Kviitungi koopia
Anna kviitungi Nr:
-
Võta kviitung
ja vajuta klahvi
SCREEN
TERE TULEMAST
Tehingud
1-Saatmine
2-Annulleerimine
3-Kaarditehing
4-Käsitsitehing
Info
1-Saatmiskoond
2-Hetketehingud
3-Vaatan tehinguid