The 250 Label Printer Applicator - ID Technology 250 Operator / Technical Manual

Model 250
Printer Applicator
Operators/Technical Manual

The 250 Label Printer Applicator

We appreciate your purchase of the ID Technology Model 250 Label Printer Applicator.
This applicator will meet or exceed your requirements for applying labels to your product.
The 250 can be used as a stand-alone printer applicator or it can be integrated into other
systems to be used in conjunction with product handling systems of all types.
The modular design of the 250 allows for less down time due to parts replacement and/or
troubleshooting. The applicator is divided into distinct modules organized by function.
Most of these modules can be replaced as an entire unit with no more than four bolts.
The end result is more time on-line, keeping production going, maintenance costs kept
down, spare parts requirements to a minimal.
The Model 250 Printer Applicator can be used with either the SATO or Zebra line of OEM
engines and can be configured as a tamp on, blow on, wipe on, swing arm, tamp-jet,
swing out, etc. (configured at the factory prior to shipping)
Please contact your local representative for assistance with other opportunities to
increase you production by automating your label, coding or marking requirements.
Page 1 of 1