Diagnostics and Tests
Tests screen
Use the Esc key to receive Views on the F5 key. Choose System from the
pull-down menu. Use the F3 key (Tests) to select the TCC. F7 key (Reset)
resets the module and F6 key (Plot) opens the plot window.
Calibration
With F1 key (Calibrate) the recalibration of the TCC can be accessed. Refer to
"Temperature Calibration"
this function. with F8 key (Calibrate).
1100 Series TCC Reference Manual
Control Module Screens for the Agilent 1100 Column Compartment
on page 45 for more information before starting
7
183