Agilent Technologies 1100 Series Reference Manual page 182

7
Control Module Screens for the Agilent 1100 Column Compartment
Settings - Column ID
With the F4 key (Column ID) you have access to the column id tag
information, see
(More) shows the rest of the parameters (inclusive # of injections). You can
overwrite the information and press F7 key (Write) to transfer the new
information into the column tag. F8 key (Right) changes to the right column id
tag information (if installed).
Settings - Run times
With the F5 key (Runtimes) you can change the stop time and the post-run
time.
172
"Column-Identification System" on page 137. Pressing F1 key
1100 Series TCC Reference Manual